Post Offer Free
Lipu Heavy Industry Company  

Gold Index: 10074

You are here: home  > Stainless Steel Three Cylinder Industrial Drying Equipment For Mixed Mortor

Stainless Steel Three Cylinder Industrial Drying Equipment For Mixed Mortor 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: 2.7x7

Stainless Steel Three Cylinder Industrial Drying Equipment For Mixed Mortor
 
Equipment Introd

Stainless Steel Three Cylinder Industrial Drying Equipment For Mixed Mortor

 

Equipment Introduction:


Stainless steel three cylinder industrial drying equipment improves the internal structure on the basis of

single drum dryer, the pre drying of wet material is added before getting into the dryer and prolong the

drying time of wet material in the dryer. It is widely used in various industries’ slag, clay, coal, iron ore

powder, ore powder, and dry mixed mortar, yellow sand and other mixed materials.

 

Performance Characteristics:


1. Stainless steel three cylinder industrial drying equipment can prevent from acid/alkali corrosion and

iron contamination.

2. Sizes of lump materials, particles, and powders are less than 20mm can be dried.

3. Gear driving is not required and it’s directly driven by roller, with higher mechanical efficiency.

4. Without the phenomenon of air leakage, the sealing difficulty is totally solved, and the installation can

be finished within a few hours.

5. 50% of area covers has been reduced compared with the single drum dryer, and land investment

reduced by 50%, power consumption reduced by 60%.

6. Final moisture indicators can be regulated easily according to the request.

7. The temperature of discharged material is < 50 , which can be directly conveyed into the storage

silo, needless to cool down in the cooling shed.

 

Working Principle:


Materials get into the internal rotary drum from the feeding device, to realize the downstream drying,

materials are lifted up and down constantly by the inner layer lifting plates and the heat exchange is

realized under the form of spiral moving, materials move to the other side of the inner cylinder and then

get into the middle cylinder, and materials are lifted up and moved forward in the middle cylinder, by the

way of two steps forward and one step back, materials absorb the heat both coming from the inner

cylinder and the middle cylinder, meanwhile, the drying time is prolonged, and materials reach optimum

drying status at this stage. Material move the other end of the middle cylinder and then get into the

outer cylinder, the dried materials are quickly discharged from the cylinder under the function of hot

wind. 

 

Technical Parameters:

 

 

Model

 Cylinder data

 Capacity(t/h)

 

Cylinder rotary speed

(r/min)

 

Power

(kW)

 

Outer cylinder diameter

(m)

 

Outer cylinder length(m)

 

Cylinder volume(m3)

 

River

sand

 

Fly ash

 

Slag

S6203

1.6

1.8

3.6

2-3

1-2

1-2

3-10

4

S6205

2

2

6.28

4-5

2-3

3-4

3-10

5.5

S6210

2.2

2.5

9.5

8-10

4-5

6-8

3-10

7.5

S6215

2.5

2.8

13.7

12-15

7-8

10-12

3-10

11

2×4

2

4

12.56

8-12

4-6

8-10

3-10

3×2

2×5

2

5

15.7

12-15

6-7

10-13

3-10

4×2

2×6

2

6

18.84

20-25

10-17

20-27

3-10

7.5×2

2.2×4.5

2.2

4.5

bigPhoto
 Mr. Miss. Wendy Zhao

Tel: 86-21-68798919
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Lipu Heavy Industry Company [China (Mainland)]


Business Type:Manufacturer
City: Shanghai
Province/State: Shanghai
Country/Region: China (Mainland)

You May Like:

Product (215)